Nano Shield is a high performance top-coated paint protection film offers highest protection on automobile smooth surface from rock chips, scratch, abrasion and corrosion. Nano Shield not only prevents the film from discoloring due to contamination and ultra-violet radiation, but also heals itself from swirl marks and light scratches that can occur through ordinary washing and drying or daily driving. Contaminants like bug splatter, bird droppings, sap and road tar wipe off Nano Shield super-slick surface with a cloth, while scuffs and light scratches in the surface of the film disappear within minutes in the heat of the sun or the warmth of your garage—leaving your car pristine and the protective film like new.
FAQ
WHAT IS THE PROPER TEMPERATURE TO APPLY NANO SHIELD?
For best results, application should be performed indoors between 55°F and
90°F (13°C – 32°C) away from wind and dirt particles.
WILL NAN SHIELD HARM THE ORIGINAL PAINTED SURFACE IF THE FILM IS REMOVED?
Painted area must be fully cured before applying. If the film is properly applied, it can be removed without damaging paint surfaces beneath the film.
HOW IS NANO SHIELD REMOVED?
Nano shield can be removed at any time from corner of the film and pulling the film off the vehicle surface at a 45 to 90-degree angle. If the film has been present a long time, or if the film and vehicle are cold, a heat gun or hair dryer may be used to soften the adhesive, allowing easier removal. If any adhesive remains on the vehicle after removal of the film, it can be removed by using general adhesive cleaner according to the package directions.
FAQ
WHAT IS THE PROPER TEMPERATURE TO APPLY NANO SHIELD?
For best results, application should be performed indoors between 55°F and
90°F (13°C – 32°C) away from wind and dirt particles.
WILL NAN SHIELD HARM THE ORIGINAL PAINTED SURFACE IF THE FILM IS REMOVED?
Painted area must be fully cured before applying. If the film is properly applied, it can be removed without damaging paint surfaces beneath the film.
HOW IS NANO SHIELD REMOVED?
Nano shield can be removed at any time from corner of the film and pulling the film off the vehicle surface at a 45 to 90-degree angle. If the film has been present a long time, or if the film and vehicle are cold, a heat gun or hair dryer may be used to soften the adhesive, allowing easier removal. If any adhesive remains on the vehicle after removal of the film, it can be removed by using general adhesive cleaner according to the package directions.